ules.d/
vi 95-touchpad.rules
# Create a symlink to waveshare touchscreen input device
SUBSYSTEM=="in... raspberrypi.stackexchange.com/questions/71040/how-to-know-which-file-in-dev-input-event-represent-for-
om/2013/07/24/interfacing-an-spi-adc-mcp3008-chip-to-the-raspberry-pi-using-c/
=== Anschluss über i2... ents
* Operating temperature range of -55°C to +125°C
* accurate to ±0.5°C over the range of -10°C to +85°C.
* Programmable Resolution 1-Wire Digital Thermometer DS1
s warten! sonst Waiting for process with pid 4049 to finish!
dnf install oraclelinux-developer-releas... de bash>
dnf update
#Bei Fehler "No more mirrors to try - All mirrors were already tried" mehrfach st...
Resize device id 1 (/dev/mmcblk0p3) from 3.25GiB to max
</code>
neu starten mit "reboot".
=== Fes
ition #3 contains a btrfs signature.
Do you want to remove the signature? [Y]es/[N]o: N
</code>
Sch... nsor readings
xsensors.aarch64 : An X11 interface to lm_sensors
..
dnf install lm_sensors.aarch64 lm_... -partition
* https://geraldonit.com/2019/10/19/how-to-resize-a-btrfs-root-partition-on-oracle-linux/
"zickig" herausstellt, ist dringend auch ein USB to Serial Adapter zu empfehlen!
Mehr zum HC1 in die... fo.php?g_code=G134111883934
* 4pin wire harness to connect to ODROID-X
<code>
_____UART____
|Pin 4 - GND|
|Pin 3 - RXD|
|Pin 2 - TXD|
|Pin 1 - VCC|
\__... ilabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
* Im Gerätemanager auf
N, 1GB RAM] kostet um die 80€ und ist dann auch auto update fähig.
Die Bastel Lösung unter einem Red... -user.target /etc/systemd/system/default.target
To switch back:
rm /etc/systemd/system/default.targ... figuration for format details
# Run mongod --help to see a list of options
bind_ip = 127.0.0.1
quiet ... nuell zusammensetzen und damit evtl. sogar eine Auto Update fähige Variante erhalten. Hierzu mit Alien
ltung}}
In einem Test habe ich einen LM 317 im TO-92 Gehäuse mit 2 * 470Ohm beschaltet und ~2,54V d... )
====Programm====
Ablauf:
- Ein High to Low Signal an CS anlegen um die Messung zu starte... twarnings(False)
# Which RPIO Numbering you like to use
RPIO.setmode(RPIO.BCM)
# Set the used RPIO PO... e = 2.540
# runs
v_runs = 10
# Helper Function to set the bits
# set a bit to 1
def setBit(int_type
ng-hacks.com/documentation/tutorials/raspberry-pi-to-arduino-shields-connection-bridge#step4
==Schni... es
yum install arm-gp2x-linux-gcc-c++.armv6hl
#to avoid error messages, not 100% a must
yum install... 6hl
</code>
==Bridge Libraries==
Raspberry Pi to Arduino Shields Connection Bridge Libraries übers
twarnings(False)
# Which RPIO Numbering you like to use
RPIO.setmode(RPIO.BCM)
# OUT - Enable Port f...
__author__ = 'gpipperr'
"""
Small Python Script to decode a DFC77 Module connect to the Raspberry
Connect:
SIG to Pin 11 GPIO 17
ENABLE to Pin 13 GPIO 27
Parameter -d
To supress th
lternatives --display python
python - status is auto.
link currently points to /usr/bin/python3.4
/usr/bin/python2.7 - priority 1
/usr/bin/python3.4 - pr
>
postgres=# \connect pdns
You are now connected to database "pdns" as user "postgres".
#SQL block w... rows)
grant all on table comments to powerdns;
grant all on table comments_id_seq to powerdns;
grant all on table cryptokeys to powerdns;
grant all on table cryptokeys_id_seq