Benutzer-Werkzeuge

Webseiten-Werkzeuge


python:python_write_serial_com_port

Windows 7 - Mit Python 2.7 über die COM Port Schnittstelle ein M18ST05A VFD Display ansprechen

Im Zug eines zufälligen „dump diving“ ist mir ein altes VFD Display (M18ST05A) eines alten Medion Rechners (~ Baujahr ~2008) in die Hände gefallen, danke an Herbert.

 Medion VFD Display M18ST05A

Vorbereitung

Download der Software:

Installation der Software:

  • python-2.7.9.msi installieren, Installer starten, alles default, unter D:\Python27 installieren
  • pyserial-2.7.win32_py3k.exe starten, alles default und installieren

Das Display anschließen

Zum Glück wurde auf dieser Seite die Beschaltung des Medion Display und die Steuer Sequenzen beschrieben

Einen PL2302HX USB Adapter entsprechend verkabelt (JF LCD 4-Pin-Anschluss?) und damit das Display über den USB Port am PC angeschlossen.

Über den Gerätemanager prüfen welcher COM Port für den Adapter vergeben wurden.

Ohne dass ein erstes Kommando an das Display geschickt wird, wird allerdings im ersten Schritt NICHTS angezeigt!

 Anschluss des Displays an den USB UART Adapter- JF LCD 4-Pin-Anschluss?

Das Display wird mit „9600,N,8,1“ : „ 9600 baud, keine Parität (None), 8 Datenbits, 1 Stopbit, keine Flussteuerung„ angesprochen, es können auf die zwei Zeilen sofort Buchstaben ohne weitere Steuer Sequenzen geschrieben werden.

Die COM Ports in der Python Library werde von 0 bis n durchgezählt , daher wird der COM6 um fünften Port!

Ein Code Beispiel um das Display anzusprechen und einige der Steuersequenzen zu testen:

gpi_test_medion_dispay.py
import serial
import struct
import binascii
import sys
import time
 
def printf(format, *args):
    sys.stdout.write(format % args)	
 
#=====================================================	
# Open the Serial Interface	
com6 = serial.Serial()
 
com6.port=5
com6.baudrate = 9600
com6.parity=serial.PARITY_NONE
com6.rtscts=1
com6.timeout=None
com6.stopbits=serial.STOPBITS_ONE
com6.bytesize=serial.EIGHTBITS
 
com6.open()    
 
#get the status 
print(com6.isOpen())
 
#get the settings
com6.getSettingsDict()
 
#=====================================================
# Write Letters to the first line
 
for i in range(0,16):
	com6.write("X")
	time.sleep(0.5)
 
#=====================================================
 
s_send_data = struct.Struct('b b b b')
 
# enable the other elementes with a value > 0
# some of the elements can be dimmed over the value 
# all normal elements 0x30
 
for i in range(0,30):
    for y in range(1,12): 
		printf("Command :: 0x1B 0x30 %d %d \n", i,y)
		commands=(0x1B, 0x30, i ,y)
		command_packed_data = s_send_data.pack(*commands)
		com6.write(command_packed_data)
		print 'Original values::', commands
		print 'Format string  ::', s_send_data.format
		print 'Uses           ::', s_send_data.size, 'bytes'
		print 'Packed Value   ::', binascii.hexlify(command_packed_data)
		time.sleep(0.1)
 
# check what happens with  0x31
for i in range(0,30):
    for y in range(1,12): 
		printf("Command :: 0x1B 0x31 %d %d \n", i,y)
		commands=(0x1B, 0x31, i ,y)
		command_packed_data = s_send_data.pack(*commands)
		com6.write(command_packed_data)
		print 'Original values::', commands
		print 'Format string  ::', s_send_data.format
		print 'Uses           ::', s_send_data.size, 'bytes'
		print 'Packed Value   ::', binascii.hexlify(command_packed_data)
		time.sleep(0.1)
 
 
# check what happens with  0x32
for i in range(0,5):
    for y in range(1,12): 
		printf("Command :: 0x1B 0x32 %d %d \n", i,y)
		commands=(0x1B, 0x32, i ,y)
		command_packed_data = s_send_data.pack(*commands)
		com6.write(command_packed_data)
		print 'Original values::', commands
		print 'Format string  ::', s_send_data.format
		print 'Uses           ::', s_send_data.size, 'bytes'
		print 'Packed Value   ::', binascii.hexlify(command_packed_data)
		time.sleep(0.1)
 
#=====================================================
#Switch off the elements
#
 
for x in range(0,30):
	commands=(0x1B, 0x30, x ,0)
	command_packed_data = s_send_data.pack(*commands)
	com6.write(command_packed_data)		
 
 
for x in range(0,30):
	commands=(0x1B, 0x31, x ,0)
	command_packed_data = s_send_data.pack(*commands)
	com6.write(command_packed_data)		
 
 
#=====================================================
#alternativ	
#use escaped syntax to pack the data to transmit
#Switch on
#command="\x1B\x30\x00\x03"	
#com6.write(command)
#Swith off
#command="\x1B\x30\x00\x00"	
#com6.write(command)
 
#=====================================================
#Switch to line 2
#
command="\x1B\x22"
com6.write(command)
 
#Write a letter to line 2
 
for i in range(0,16):
	com6.write("W")
	time.sleep(0.5)
 
 
#=====================================================
#
s_send_data = struct.Struct('b b')	
#
#Delete the line
 
commands=(0x1B, 0x50 )
command_packed_data = s_send_data.pack(*commands)
 
com6.write(command_packed_data)
 
 
#=====================================================
#Switch back to  line 1
#
command="\x1B\x21"
com6.write(command)
 
#delete also
 
commands=(0x1B, 0x50 )
command_packed_data = s_send_data.pack(*commands)
com6.write(command_packed_data)
 
 
 
#=====================================================
# Time
#
#Set the clock  0x1B 0x00 M H T M J J
#to set a real date use 2Byte BCD values
 
command="\x1B\x00\x04\x04\x04\x04\x04\x04"
com6.write(command)
 
#show the Clock 0x1B 0x05
command="\x1B\x05"
com6.write(command)
 
 
 
#=====================================================
#Close the port
com6.isOpen()
 
com6.close()
 
exit()

Beim Aufbau des „struct“ „s_send_data „ auf das „b“ Format achten, damit die 8 Bit Folgen auch so erstellt werden!

Quellen

Diese Website verwendet Cookies. Durch die Nutzung der Website stimmen Sie dem Speichern von Cookies auf Ihrem Computer zu. Außerdem bestätigen Sie, dass Sie unsere Datenschutzbestimmungen gelesen und verstanden haben. Wenn Sie nicht einverstanden sind, verlassen Sie die Website.Weitere Information
python/python_write_serial_com_port.txt · Zuletzt geändert: 2015/01/20 20:37 von gpipperr

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki