e/fachabteilungen/abt4/fb-44/ag-442/dissemination-of-legal-time/dcf77.html|Zeitzeichensender DCF77]] i... DCF-Signal am Maximum ist
* Enable auf GND bzw. offen => Modul ist aktiviert
Anschluss - Übersicht... rt the script with -d 01
Parameter -r
Define how often the time will be read
Paramter -e
Not anlyse in the middle of the datagramm between 300ms and 900ms to save CPU
et the bits
# set a bit to 1
def setBit(int_type, offset):
mask = 1 << offset
return (int_type | mask)
# set a bit to 0
def clearBit(int_type, offset):
mask = ~(1 << offset)
return (int_type & mask)
# get the real Voltage value from the
%H")
PARAM=backlight
#set the mode over the hour of the day
if [ ${MY_HOUR} -lt 7 ]
then
PARAM=night... tab aufrufen
#
crontab -e
# Minute Hour Day of Month Month Day of Week Command
# (0-59) (0-23) (1-31) (1-12 or Jan-Dec... Failed to create camera component
mmal: Only 64M of gpu_mem is configured. Try running "sudo raspi-co
installieren/
----
==== Display am PI ====
The official Raspberry Pi touch display
* https://ww... measurements
* Operating temperature range of -55°C to +125°C
* accurate to ±0.5°C over the range of -10°C to +85°C.
* Programmable Resolution 1-W... measurements
* Operating temperature range of -55°C to +125°C
* accurate to ±0.5°C over
891149824 bytes, 120881152 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical... 1, default 120881151):
Created a new partition 3 of type 'Linux' and of size 57.3 GiB.
Partition #3 contains a btrfs signature.
Do you want to remove th... de bash>
btrfs filesystem resize max /
Resize '/' of 'max'
df -h /
Filesystem Size Used Avail U
format details
# Run mongod --help to see a list of options
bind_ip = 127.0.0.1
quiet = true
dbpath ... //serverfault.com/questions/643006/what-is-status-of-proc-and-how-do-i-call-it
# add to /lib/lsb/init-functions
vi /lib/lsb/init-functions
status_of_proc ()
{
local pidfile daemon name status
en DOS Header etc. loss zu werden
dd if=/dev/zero of=/dev/sda bs=1M count=8
8+0 records in
8+0 records... cht geklappt! Das dann über einen zweiten Rechner offline (nicht gemounted!) durchgeführt!
* Falls... ing
<code>
#speed test
# INTENSO
dd if=/dev/zero of=/data/testSpeedFile bs=1M count=2024
..
212231782
#set the out port to LOW again
# LED OFF
RPIO.output(out_port,RPIO.LOW)
R... _id, callback, edge='both', pull_up_down=RPIO.PUD_OFF, threaded_callback=False, debounce_timeout_ms=No... back=SetLed, edge='rising', pull_up_down=RPIO.PUD_OFF, debounce_timeout_ms=25)
# Non Blocking wait (