): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x94617c97
Device Boot Start End Sectors Size Id Type
/dev/mmcblk0p1 * 2048 264191 262144 ... sh>
btrfs filesystem resize max /
Resize device id 1 (/dev/mmcblk0p3) from 3.25GiB to max
</code>
): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xd42f217f
Device Boot Start End Sectors Size Id Type
/dev/mmcblk1p1 * 2048 264191 262144 ... ice Boot Start End Sectors Size Id Type
/dev/mmcblk1p1 * 2048 264191 2621
x.php?main_page=product_info&cPath=70_75&products_id=196
* https://www.coolcomponents.co.uk/dab-dab-... ig bei Ebay ~5€
* http://www.instructables.com/id/FM-Radio-the-easy-way/
Link zu dem RDA5807M RRD... AB/DAB+/DMB-Radio optimised Kino 3 baseband chip. Ideal for WorldDMB Profile 1 receivers, providing su
sdcard/boot
# hier wieder auf den richtig device ID achten !!
sh sd_fusing.sh /dev/sda
/dev/sda reader is identified.
BL1 fusing
30+0 records in
30+0 record... m eine SSD handelt, i<fc #ff0000>st das eine gute Idee? Wird sich zeigen ... leider hat es sich nicht ... n/products/prdt_info.php?g_code=G134111883934&tab_idx=1
Habe ich natürlich nicht gerade zur Hand, neh
zur erzeugten Wärmemenge gesetzt werden.
==== Idee ====
Die Förderschnecke für den Brenner läuft ... dann doch mal ein schöner Sinus dargestellt.
Die Idee war ja einfach einen "Non-invasive AC Current S... hteck Impuls mit 5V Flanke erzeugen.
Dazu kann ideal eine OP Schaltung verwendet werden, der einmal
rden => http://www.dcf77logs.de/WebConsole.aspx
Ideal um das eigene Programm zu überprüfen.
----
=... )
#define the interrupt function
def SetLed(gpio_id,val):
global blink_count
global call_time
t... errupt on both
# RPIO.add_interrupt_callback(gpio_id=in_port,callback=SetLed, edge='both', pull_up_dow... on only Rising
RPIO.add_interrupt_callback(gpio_id=in_port,callback=SetLed, edge='rising', pull_up_d
block weise ausführen:
CREATE TABLE domains (
id SERIAL PRIMARY KEY,
name ... ndex ON domains(name);
CREATE TABLE records (
id SERIAL PRIMARY KEY,
domain_id INT DEFAULT NULL,
name ... ,
CONSTRAINT domain_exists
FOREIGN KEY(domain_id) REFERENCES domains(id)
ON DELETE CASCADE,
CO
e
#define the interrupt function
def SetLed(gpio_id,val):
global push_count
push_coun... int "GPIO port {} :: Value :: {}".format(gpio_id, val)
# end after 10 pushs
if (pu... the Interrupt
# RPIO.add_interrupt_callback(gpio_id, callback, edge='both', pull_up_down=RPIO.PUD_OFF... imeout_ms=None)
RPIO.add_interrupt_callback(gpio_id=in_port,callback=SetLed, edge='rising', pull_up_d