ALUE=0;
const int MAX_POTI_VALUE=1023;
//devider for one second in the range of the poti
float SEC_TIC... 0;
int seconds=0;
int total_seconds=0;
//Buttons for the down timer
int start_countButton=LOW;
boolea...
void setup() {
// Open serial communications for debug
Serial.begin(57600);
// wait for serial port to connect
while (!Serial) {
;
Override high DPI scaling behavior.
Choose System for Scaling performed by:
Click OK.
</code>
Quelle Go...
== Initalisieren==
Zur Initalisierung mit dem Format Button im ersten Schritt Filesystem auf dem Co... 6/04/17/A-Small-Collection-of-NodeMCU-Lua-Scripts-for-Data-Collection
In meine Fall will ich die folg... if wifi.sta.getip() == nil then
print("Wait for IP Connection to set time")
else
print("---s
str(data))
print("-- Info :: Raw data: {0}".format(data))
print("+" * 80)
# ----------------... r :: No device with the vendor id connected {0}").format(at826_vendor_id)
else:
# search for the AT826
# Open
for at826device in all_devices:
# try:
try:
=
Bei leistungsbezogenen Werte wird mit folgender Formel der dB Wert bestimmt.
Formel(1):
^<m>a=10*lg(P_1/P_2)dB</m>^
Das Verhältnis der Leistungen kann wieder aus der dB Angabe ermittelt werden:
Formel(2)
^<m>P_1/P_2=10^{{a{/}dB}/10}</m>^
=== dB... Eingangs- und Ausgangsspannung / -strom ===
Die Formel für das dB Verhältnis von Eingangs- und Ausgan
==== Sketch====
<code c++ temp.ino>
// Libraries for the Dallas Sensor
#include <OneWire.h>
#include <... rature sensors(&oneWire);
//remember the devices for max 5 devices
DeviceAddress term[5];
//---------... communications
Serial.begin(57600);
// wait for serial port to connect. Needed for native USB port only
while (!Serial) {
;
}
Serial.printl
bei meinem Gerät schon stark auf.
Laut anderen Foren wird inzwischen von http://www.nextel-coating.c... niert und verstaubt" aus.
Siehe auch dazu diesen Foren Eintrag zu diesem Problem => https://www.radiomuseum.org/forum/philips_pm3212_pm_3212_zweikanal_oszilloskop_la... PM2528) , 82/1/56 => https://www.radiomuseum.org/forumdata/upload/Funkschau_Inhalt_1980-1990.pdf
198
a bits, even parity, 1 stop bit. Jitter < 50 ms.
#Format:
#Byte Nr. Designation Sign HEX Code
#1 Stat s... s {10}\n,second_tens {11}\n,second_units {12}\n".format(year_tens,year_units,month_tens,month_units,da... ta=data+bytes.fromhex('0D')
# telegram of the format IF 482 (length: 17 characters)
return data
# Open the serial port for communication
ser = serial.Serial(
port="COM7
Magic }}
----
==== Arduino support package for NXP LPC chip====
Evlt. ist es dann doch etwas ei... cks/links/1404150
* http://www.hobby-roboter.de/forum/viewtopic.php?f=4&t=152
* https://github.com/... ronischer-w%C3%BCrfel/
==Debuging==
* http://forum.stellarisiti.com/topic/637-black-magic-probe-for-stellaris-launchpad/
* http://www.blacksphere.co.
n_time == 59 then
min_time=0
print(string.format('Stand nach einer Minute :: %05i ', pulszaehle... er_min=pulszaehler_min+pulszaehler
print(string.format('Stand in dieser %02i Sekunde :: %05i :: Sum ...
----
==== Quellen ====
Real time OS Lua-RTOS for ESP32
* https://www.espressif.com/en/media_ove
h ist.
Da Eingangssignale sehr verschiedene Formen haben können, müssen sie zunächst in Im... 10mhz-ocxo-dist:start
* https://www.eevblog.com/forum/projects/possible-to-build-your-own-gps-discipl