ti_sum/avg_reads);
// if the value has not changed a lot ignore!
if ( jitter_check > ji... 812 LEDs)
// NEO_KHZ400 400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
// NEO_GRB ... els are wired for RGB bitstream (v1 FLORA pixels, not v2) <=== This Pixel Ring !
Adafruit_NeoPixel pix... 7, BK1080 and RTC6207E.
* Does not support infrared remote control and USB device mo
Can't autodetect firmware, because proper answer not received (may be unknown firmware).
Please, rese... end,
function()
print('Time Sync was not sucessfull')
end
)
-- get t... end,
function()
print('Time Sync was not sucessfull')
end
)
-- get t
e will be taken over at 'A' and 'M').
#2) Weekday not evaluated by BU 190(t).
#3) Winter, Summer or Local time: Will be checked but not evaluated.
def getTimeTelegram():
# current date
(vendor_id=at826_vendor_id).get_devices()
if not all_devices:
print("-- Error :: No device... # browse feature reports
# Not implemented with AT826
print('--
nPulseInput, --pulse_gpio_num
pulsecnt.PCNT_PIN_NOT_USED, --ctrl_gpio_num If no control is desired specify PCNT_PIN_NOT_USED
pulsecnt.PCNT_COUNT_INC, --pos_mode PCNT
COM4
Connecting.......
COM4 failed to connect: Cannot configure port, something went wrong. Original message: OSError(22, 'A device which does not exist was specified.', None, 433)
</code>
Mein