py v2.7-dev
Found 2 serial ports
Serial port COM5
Connecting....
Detecting chip type... ESP8266
Chip is ESP... 6-float.bin
esptool.py v2.7-dev
Serial port COM5
Connecting....
Detecting chip type... ESP8266
Chip is ESP... ode nach.
In der init.lua kann zum Beispiel der Connect zum Wifi Netz konfiguriert werden.
== Wifi Connection hinterlegen==
<code lua>
--init.lua
-- Modus defin
---------
// add the 7 Segment LED
// pin 12 is connected to the DataIn
// pin 11 is connected to the CLK
// pin 10 is connected to LOAD
// only one MAX72xx Chip
// LedControl(dataPin,clockPin,csPi... rial.begin(57600);
// wait for serial port to connect. Needed for native USB port only
while (!Serial
ontrol.h>
// add the 7 Segment LED
// pin 12 is connected to the DataIn
// pin 11 is connected to the CLK
// pin 10 is connected to LOAD
// only one MAX72xx Chip
// LedControl(dataPin,clockPin,csPi... al.begin(57600);
// wait for serial port to connect
while (!Serial) {
;
}
Serial.p
sp32-nodemcu-firmware-compiling/
Problem:
<code>
Connecting........_____....._____....._____....._____....... ._____....._____....._____
/dev/ttyUSB0 failed to connect: Failed to connect to Espressif device: Invalid head of packet (0x08)
</code>
Beim Flaschen über die rech... py v3.1-dev
Found 2 serial ports
Serial port COM4
Connecting........_____...
Detecting chip type... ESP32
C
py v3.1-dev
Found 2 serial ports
Serial port COM4
Connecting........_____...
Detecting chip type... ESP32
C... 2-v1.13.bin
esptool.py v3.1-dev
Serial port COM4
Connecting........_
Chip is ESP32-D0WDQ6 (revision 1)
Fea... py v3.1-dev
Found 2 serial ports
Serial port COM4
Connecting.......
COM4 failed to connect: Cannot configure port, something went wrong. Original message: OSError(2
hop auf der [[https://apex.doag.org/de/home/|Apex Connect 2016]] in Berlin konnte ich erste Erfahrungen mit... ause zu nehmen.
{{ :elektronik:electric-imp-apex-connect-2016-workshop-v01.png | Electic Imp Temperaturen